The F116A1047 is a Honeywell two-stage ducted or stand alone air cleaner. It delivers powerful air cleaning for commercial and light industrial environments. These modular air cleaners operate separate from the HVAC system. Using separate ductwork helps isolate airborne particles and odors so they can be captured, and may even be used to create an "air curtain", an invisible barrier of positive or negative air pressure that controls the flow of indoor air pollutants. The expense of additional ductwork is offset by the reduced amount of outdoor air that needs to be imported, and the cost of conditioning that outdoor air may require.
Air flowing through these units undergoe two stages of cleaning depending upon the filter used. The first stage is a prefilter rated 30-40% ASHRAE dust spot efficiency. This prefilter captures large particles, and is disposable.
The second stage of cleaning can include one of the following: a 95% ASHRAE filter, a 95% DOP filter, a 99.97% HEPA filter, or a set of 40 plus pounds of CPZ filters. CPZ filters are specifically formulated for maximum efficiency at reducing a broad range of gasses, odors, and VOCs. All filters are sold separately.
Essentially, you can custom configure a unit to reduce levels of particles and or gases that cause the problem in your facility. Working together, these air cleaning modules can capture most indoor air pollutants.
Maintenance takes just minutes with no tools required. All units allow easy access to the replaceable media. All feature a one-horsepower, forward-curve, direct drive blower motor that moves close to 2500 CFM of air through the air cleaner components depending upon configuration. These commercial air cleaners are simple to install, operate, and maintain and are backed by a two-year limited warranty.
We make it as easy as possible to ensure you get the lowest prices available: